水泥隔离墩钢模具两侧位置是有着相同大小的孔洞，这种设计是为了让隔离墩可以更好的连接在一起，因为不同环境中使用的隔离墩，并不是单独去进行放置的，需要多个隔离墩组合在一起，可以使用绳子或者是钢条进行他们之前的连接，然后再去进行他的摆放就可以了。

水泥隔离墩钢模具每个不同的模具都是有着自己的寿命，如果说长时间的错误使用模具，就会导致模具要多次的进行维修，而这样也会让水泥隔离墩钢模具的使用寿命下降，所以说我们每次的加工制作，都要注意好模具的保护。

水泥隔离墩钢模具就是在灌浆之前，脱模剂的涂刷是不能够省略的，如果没有脱模剂可以使用机油或者是食用油来进行代替，这都是可以的，避免了泥浆和钢模具的直接接触，大家都知道隔离墩钢模具在操作的时候，要在干燥的环境中间进行生产，同样在生产的时候脱模剂也是起到了一个隔绝的作用，因为泥浆是需要使用大量清水来进行搅拌的，长期和钢模具进行接触的话，会导致模具出现生锈的风险。

There are holes of the same size on both sides of the steel mold of the cement isolation pier. This design is to better connect the isolation piers together, because the isolation piers used in different environments are not placed separately

, multiple isolation piers need to be combined. You can use ropes or steel bars to connect them before, and then place them.

Each different mold of cement isolation pier steel mold has its own service life. If the mold is used incorrectly for a long time, it will lead to the maintenance of the mold for many times, which will also make the cement isolation pier steel mold

The service life decreases, so we should pay attention to the protection of the mold every time we process and manufacture.

The steel mold of cement isolation pier is before grouting, and the brushing of release agent cannot be omitted. If there is no release agent, oil or edible oil can be used to replace it, which can avoid mud and steel mold

As we all know, the isolation pier steel mold should be produced in a dry environment during operation. Similarly, the release agent also plays an isolation role during production, because mud is needed

If a large amount of clean water is used for mixing, long-term contact with the steel mold will lead to the risk of rust.